Stable & DurableRS232 to RS422/RS485 converter for CCTV PTZ, Card access data control, Industrial I/O, PLC commercial grade.
RM59.00
|
The product also support Server & client mode to extend RS232/422/485 via network if you use in pair.
The connection will be Device^^>Serial server^^>Network Location A ^^>Network location B ^^> Serial server^^> Computer/Device RM279.00
|
Ready Stock, Ship from Malaysia
-
Compatible with the Recommended Standards of RS-232C, RS-422 and RS-485, UT-216 interface converter can convert the single-ended RS-232 signal into balance differenced RS-422 or RS-485 signal. Also, there is a rapid transient voltage suppression protector for protection of RS-422/RS-485 interface with advanced TVS (TRANSIENT VOLTAGE SUPPRESSOR) technology adopted.
-
Under normal conditions, the TVS tube is in the state of high resistance. However, when both ends of the TVS tube are hit by a transient high energy, the impedance at both ends can be depressed by the TVS at a very high speed, and after absorbing a high current, the voltage between the two ends is suppressed and kept at a pre-set value, therefore no damage is caused to the electrical components behind by the transient high voltage impact.
-
The protector can effectively restrain lightning or ESD (electro static discharge) with a protection voltage of 600W on each line for lightning surge and surge voltage or transient over voltage possibly caused up by various reasons, and at the same time, a high-speed transmission of RS-422/RS-485 interface is ensured by the tiny capacitance between the poles.
-
Through a DB9 female connector RS-232 interface is connected to other interfaces compatible with RS-232C standard, and for RS-422 and RS-485 interfaces a DB9 male and RJ-45 connector is to be used for connection. The unique I/O circuit of the internal zero delay auto transceiver contained in the converter controls the data stream direction automatically without any handshaking signal (for example RTS, DTR etc).
-
The converter is plug-and-play without any jumper settings needed for mode shift between full duplex (RS-422) and half duplex (RS-485).
-
The converter is applicable for all the existing communication software and interface hardware without any software modifications for the previous working mechanism based on RS-232.
-
A reliable and stable point-to-point and point-to-multipoint communication can be ensured by UT-216 photoelectric isolation interface converter. For point-to-multipoint communication, as many as 32 interface facilities of RS-422 or RS-485 standard can be connected to each converter, and a high data transmission rate of 300-115.2KBPS can be achieved.
-
Power indicator light and data traffic indicator light are also available with the converter for malfunction indication. Two conversion communication modes including RS-232 to RS-422 and RS-232 to RS-485 are supported.
Specifications:
- Interface characteristic: compatible with the standards of RS-232C and RS485/RS-422 issued by EIA/TIA.
- Electric interface: DB9 female connector for RS-232 interface input end, DB9 male and RJ-45 connector for RS-422/RS-485 interface output end.
- Protection grade: +/-15KV ESD protection for RS-232 interface, and 600W surge protection each line for RS-422 and RS-485 interfaces.
- Operation mode: asynchronous half duplex or asynchronous full duplex.
- Signal indication: 3 pilot lamps for Power (PWR), Send (TXD) and Receive (RXD).
- Transmission media: twisted pair cable or shielded cable.
- Transmission rate: 115.2K BPS to 300M, 38.4K BPS to 2.4KM and 9,600 BPS to 5KM.
- Dimensions: 113mm*55mm*25mm.
- Working circumstance: -40℃to 85℃, relative humidity 5%-95%.
- Transmission distance: 0-1,200meters (115,200bps-9,600bps).
Included
- 1 unit RS485 / RS232 converter
- English User Guide
- 1 unit DB9 cable
- 1 unit DC Power adapter
- Retail Box
Shipping
- Postage Method: POSLAJU/Courier Designated by Marketplace
- Item usually will be post out same day / next working day (depends on Pos laju collection schedule) if payment verified before 12pm except there is special announcement.
- Item ship from Malaysia
- Parcel usually will be arrive within 1-3 days EXCEPT: P.O.Box, rural area and unexpected delay by pos laju or missed delivery, addresee unreachable, etc.
About Us
- We know nobody is perfect, but we try our best to serve your satisfaction and will improve from time to time. Your suggestion & understanding is highly appreciated,
RM128.00
|
- Standards: RS-232, RS-485, RS-422 TIA/EIA
- Automatic data direction control, no need external flow control signal (RTS), real TXD/RXD/GND communication
- Baudrate: 300bps-115.2Kbps
- Allows connecting 128 sets RS-485 or RS-422 device
RM239.00
|
- 🔥Ship from Malaysia
- 🔥Local Ready stock & Local Warranty
RC-5 data logger is mainly used for temperature recording during storage and ocean/air/highway transportation of foodstuff, medicine, chemicals and other products, especially widely used in all kinds of warehousing, logistics and cold chain, such as refrigerated containers, refrigerated trucks refrigerated package, cold storage, laboratory, etc. or in large-sized global supply chain businesses.
- This mini Temperature Data Logger has wide measuring range -30 °C~+70 °C, high accuracy, adjustable record intervals & long battery life for convenient and reliable temperature data recording, monitoring and analysis.
- It has a large permanent data memory of 32000 points and comes with data management software for easy data download to computers through USB interface. With the software, you could analyze data in form of tables and graphs and export in picture format. The data could be queried, SAVED , printed and exported in Word/Excel/TXT /PDF format.`
- Wide measuring range -30°C to +70°C,
- High accuracy ±0.5 °C (-20℃~+40℃)
- Large data memory (32000 measurements).
- Easy to use - Free PC data management software included
- Waterproof grade is IP67
- Data can be downloaded, analyzed, exported and printed conveniently,
- Over / Under Temperature Alarm Limits can be set
- MAX/MIN values available
- Report showing min, max temperature and graph showing if the temperature has reach min or max limit set by the user
-
-Temperature measuring range: -30 °C~+70 °C; Resolution: 0.1 °C
-Accuracy: ±0.5 °C(-20℃~+40℃); others,±1 ℃
-Temperature unit: ℃ or ℉ optional
-Record capacity: 32000 points (MAX)
-Record interval: 10s~24hour adjustable
-Sensor: Internal NTC thermal resistor
-Communication interface: USB interface
-Waterproof grade: IP67
-Power supply: CR2032 battery or power supply via USB interface, and it could upload data even no battery installed
-Battery life: in normal temperature, if the record interval sets as 15 minutes, it could be used above one year.
-Item Size: approx. 80 (L) x 34 (W) x 14 (H) mm
-Item Weight: approx. 30 g
- Sample Report Exported to Excel
- 1 x Data logger
- 1 x Software CD
- 1 x English user manual
- 1 x Battery
- Software download: http://www.elitechus.com/download/software/
- Item ship from Malaysia
- Postage Method: POSLAJU/Courier Service designated by Marketplace
- Item usually will be post out same day / next working day (depends on courier service collection schedule) except if there are no shipping notice.
- Parcel usually will be arrive within 1-3 working days EXCEPT: P.O.Box, rural area and unexpected delay by Courier service or missed delivery, addressee unreachable, etc.
- We can't guarantee delivery on time due to courier service is provided by 3rd Party and its out of our control.
- 14 Days Local warranty against manufacturer defect.
- Nobody is perfect, but we will try our best to serve your satisfaction and will improve from time to time. Your suggestion & understanding is highly appreciated.
- Do not hesitate to chat us for any inquiry, suggestion or complaints.
- If you are unhappy with our service / product, please chat us immediately before leaving any bad comment / review as giving bad rating or 1 star won't help in problem solving.
- Happy shopping with us.
RM78.00
|
- Ready stock, Ship from Malaysia
- Interface feature: RS-232C,RS-485standard interface
- compatible with EIA,TIA
- Electric interface: RS-232 DB9 female connector, RS-485
- DB9 needle connector,with connection pole
- Working mode: asynchronism half-duplex difference transmission
- Transmission media: twisted -pair or STP
RM25.00
|
|
- This data logger is mainly used for temperature and humidity recording during storage and transportation of foodstuff, medicine, chemicals and other products, especially widely used in all links of warehousing, logistics and cold chain, such as refrigerated containers, refrigerated trucks, refrigerated package, cold storage, laboratory, etc.
RM178.00
|
Ready stock, Ship from Malaysia RM98.00
|
-
Original Elitech, Brand New & High Quality.
-
Switch the modes between cool and heat ,control temperature by setting the temperature set
-
Value and the different value, temperature calibration, refrigerating control output delay protection
-
Alarm when temperature exceeds temperature limit or when sensor error
RM68.00
|
Ready Stock, Ship from Malaysia
-
High quality Industrial grade USB 2.0 to RS232 data converter, FDTI-FT232 are most stable & highest compatibility compare to others in the global market.
-
Standards: conforming to USBV1.0, 1.1 , 2.0, 3.1 and EIA RS-232.
■ USB signals: VCC, DATA+, DATA-, GND and FG..
■ RS-232 signals: DCD RXD TXD DTR GND DSR RTS CTS RI
■ Working mode: asynchronous point-to-point.
■ Direction control: adoption of automatic data stream control for automatic recognition and control of data transmission direction.
■ Baud rate: 300-921.6Kbps, automatic detection of the transmission rate of the serial interface signal.
■ Transmission distance: 5 meters for RS-232 and less than 5 meters for USB.
■ Interface protection: ±15KV electrostatic protection.
■ Interface forms: B interface female connector and DB9 male connector for USB.
■ Signal indication: 9 indicator lights for Power (PWR), Send (TXD) and Receive (RXD).
■ Transmission media: twisted-pair cable or shielded cable.
- Cable Length: 1.5m
-
Working environment: -40℃ to 85℃, relative humidity 5% to 95%
-
Support Win98/2000/2003/2008/XP/Vista/7/8/10/CE/Mac/Linux
Included
- 1 x UTEK UT-880-TC USB 3.1 Serial adapter
- Latest FTDI Driver Download Here http://www.ftdichip.com/Drivers/VCP.htm
Shipping & Warranty
- Default Postage Method: Pos Laju / Courier Service designated by Market Place
- Item usually will be post out next working day if payment verified before 6.00pm except there is special announcement.
- Parcel ship from Malaysia
- We can't guarantte delivery period as delivery service is provided by poslaju and its out of our control
- Please chat us if Parcel not arrive after 6 working days so that we can contact poslaju to follow up.
- 30 Days against manufacturer defect
About Us
- Nobody is perfect, but we will try our best to serve your satisfaction and will improve from time to time. Your suggestion & understanding is highly appreciated.
RM78.00
|
Ready Stock, Ship from Malaysia
High quality Industrial grade USB to RS485/422 data converter, FDTI-FT232 are most stable & highest compatibility compare to others in the global market.
Product name： USB to RS-485/422 Converter USB 2.0
Specification model： UT-890A
- Standards: USBV1.1, 1.0, 2.0, RS-485, RS-422 EIA
● USB Signal: VCC, DATA+, DATA-, GND, FG
● RS-485 Signal: T/R+, T/R-, GND
● RS-422 Signal: T/R+, T/R-, RXD+, RXD-, GND
● Working mode: Asynchronous, point to point or point to multi-point, 2 lines half-duplex or 4 lines full-duplex
● Direction control: Adopts data flow direction auto control technology to distinguish and control the direction
● Baudrate: 300-921.6Kbps auto-detect serial signal
● Loading Capacity: Supports point to multi-point communication, allows to connect 32 sets RS-422 or RS-485 device
● Transmission Distance: 1,200m(9,600bps) for RS-485/422, no more than 5m for USB
● Port protection: Surge, ±15KV ESD protection
● Connector: USB-A male, DB9 male
● LEDs for indicating PWR TXD, and RXD activity
● Transmission Media: Twisted-pair or shielded cable
● Dimension: 1555mm×36mm×16mm（L×W×H）
● Operating Temperature：-40℃ to 85℃
- Relative Humidity: 5% to 95%
● Transmission Distance: 0-1200m
● Supports Win2000/2003/2008/2012/XP/Vista/7/8/8.1/10/CE/Mac/Linux
- Cable Length 1.5m
Included
- 1 x UTEK UT-890A USB to RS485/422 adapter 1.5m
- Latest FTDI Driver Download Here http://www.ftdichip.com/Drivers/VCP.htm
- User Manual Download Here http://www.ioline2u.com/UserManual/3R online IOlines Network UT-890A Manual.pdf
Shipping & Warranty
- Postage Method: POSLAJU / Courier service designated by marketplace
- Item usually will be post out same day / next working day (depends on Pos laju collection schedule) if payment verified before 12pm except there is special announcement.
- Item usually will be arrive next working day after posted out for most of the major city area in West Malaysia, Sabah, Sarawak & Labuan
- Item ship from Malaysia
- 90 Days against manufacturer defect
About Us
- Nobody is perfect, but we will try our best to serve your satisfaction and will improve from time to time. Your suggestion & understanding is highly appreciated.
RM88.00
|
