Themes
    Home > Products > Arduino / Raspberry / PIC series
    Sort byShowper page
    12V DC 4 working mode Delay on/off timer repeat 0.1s to 999m Loop LED w/Case

    Ready stock, ship from Malaysia

    Description
    Features:
    • New Model, simple design
    • Easy to handle
    • Optical Isolated I/O
    • Industrial Grade PCB for stable operation
    • Permanent setting after configuration
    • With PVC Case

    Specification:

    • PVC Box Dimension: 64.2mm*34.8mm*18.5mm
    • Relay Handling: AC220V 5A / DC 30V 5A
    • Relay output: Normally Close, Common, Normally Open
    • Power Consumption: 20mA (Standby), 50mA (Working)
    • Operation Voltage: 12V
    • Time Setting: 0~999 Seconds, 0~9999 Minutes
    • MTBF: 100,000 times
    • Working Temperature: -40~85C

     

    Working Mode:

    • Working mode 1 (P-1) Delay Hold: Relay ON and start count down after trigger signal, after preset time, Relay OFF
      • Sub-mode: (A) No action if Re-trigger again During delay period (B) Re-trigger will reset preset time During delay period (C)Re-Trigger will turn relay OFF
    • Working mode 2 (P-2) Delay ON & Delay OFF : Turn on Relay after delay time (T1), Then Relay OFF after preset time (T2)
      • During delay period Sub-mode: (A) No action if Re-trigger again During delay period (B) Re-trigger will reset preset time During delay period (C)On Power direct on trigger signal
    • Working mode 3 (P-3): Relay trigger (T1) & Relay Open (T2) with preset timer, Relay repeat frequent can be set / infinite loop once power on.
      • If either T1/T2 one of it is set to 0, it will work as Delay On/Delay Off and no repeat
      • Sub-mode: (A) Turn On relay 1st once power on, (B) Turn off relay 1st Once power On
    • Working mode 4 (P-4): Input signal on then Relay On, count down start after Input Trigger signal loss, Relay Open after count down time. If input trigger signal re-trigger during count down, it will reset the cycle.
    • Button Setting
      • K1: function selection button: long press K1 button for 2 seconds, P-* appears, short press K1 to select mode, press K2 to enter mode

      • K2: Shift key: Press to adjust the flashing position of the digital tube, wto save setting, press K2 until all digital tube no longer flashes, then setup is completed and automatically saved

      • K3: adjusts the value of the flashing digital tube. 

        K3: When the digital tube is flashing: use K3 to adjusts the value, 0 to 9 change sequentially.

        When the digital tube display is static use K3 to adjust decimal point position, the decimal point represents 0 to 999 minutes if position infront of last digit; 0 to 99.9 seconds in front of last two digits; 0 to 999 seconds if no decimal point.

        Note 1: After the working mode is selected, short press K1 to enter the sub-function A, B, C switching, the digital tube will not display A or B or C, you need to short press K1, give the signal trigger test to confirm, default setting is A

        Note 2: The functions P-2 and P-3 have two sets of time to be adjusted. Press K2 six times for one cycle, the first three times to adjust one time, and the last three times to adjust another time. (The blue light indicates the time when the relay is connected, and the blue light indicates the time when the relay is turned off.)

    Included
    • 1x 12V Control Board w/ PVC Case
    Shipping & Warranty
    • Postage Method: POSLAJU/ Courier service Designated by Market place
    • Item usually will be post out same day / next working day (depends on Pos laju collection schedule) if payment verified before 12pm except there is special announcement.
    • Item ship from Malaysia
    • Parcel usually will be arrive within 1-3 working days EXCEPT: P.O.Box, rural area and unexpected delay by pos laju or missed delivery, addresee unreachable, etc.
    • 7 Days warranty against manufacturer defect
    About Us
    • Nobody is perfect, but we will try our best to serve your satisfaction and will improve from time to time. Your suggestion & understanding is highly appreciated.
    RM39.00
    Stock available
    Add To Cartmore info
    1 Channel 5V High/Low level trigger 30A Relay board Opto PLC Arduino

    Ready Stock, Ship from Malaysia

    RM23.00
    Stock available
    Add To Cartmore info
    1 Channel 12V High/Low level trigger 30A Relay board Opto PLC Arduino

    Ready stock, ship from Malaysia

    1 Channel 12V High/Low level trigger 30A Relay board Opto PLC Arduino

    RM25.00
    Stock available
    Add To Cartmore info
    1 Channel 5V Optocoupler isolated Relay Module board Alarm PLC IO

    Ready stock, Ship from Malaysia

    RM6.90
    Stock available
    Add To Cartmore info
     5~30V 8 Channel 5V 12V 24V Optocoupler isolated Relay Module board Wide Voltage PLC

    This is a Wide Voltage 5~30V 8-Channel Optical Isolated Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller, Home alarm system.

    RM48.00
    Stock available
    Add To Cartmore info
    4 Channel 24V Optocoupler isolated Relay Module board terminal High/Low TTL

    Ready stock, SHip from Malaysia

    RM28.00
    Stock available
    Add To Cartmore info
    5V/12V/24V DC 3 working mode Delay on/off timer repeat 1-9999s/9999m Loop LED

    Ready stock, ship from Malaysia

    From RM 32.00
    more info
    2 Channel 3.3V/5V Omron Solid state Relay board Low Level Trigger Raspberry Pi Arduino control AC 220~240V 2A device

    Ready stock, SHip from Malaysia

    RM23.90
    Stock available
    Add To Cartmore info
    2 Channel 3.3V/5V Omron Solid state Relay board High Level Trigger Raspberry Pi Arduino  control AC 220~240V 2A device

    Ready stock, Ship from Malaysia

    RM23.90
    Stock available
    Add To Cartmore info
    4 Channel 3.3V/5V Omron Solid state Relay board Low Level Trigger Raspberry Pi Arduino  control AC 220~240V 2A device

    Ready stock, Ship from Malaysia

    RM39.90
    Stock available
    Add To Cartmore info
    4 Channel 3.3V/5V Omron Solid state Relay board High Level Trigger Arduino  control 230V AC 2A Raspberry Pi

    Ready Stock, Ship from Malaysia

    RM39.90
    Stock available
    Add To Cartmore info
    8 Channel 3.3V 5V Omron Solid state Fused Relay board Raspberry Pi Arduino Control AC 220~240V 2A device G3MB-202P

    8 Channel 3.3V 5V Omron Solid state Fused Relay board Raspberry Pi Arduino Control AC 220~240V 2A device G3MB-202P

    RM58.00
    Stock available
    Add To Cartmore info
    1 Channel 24V Optocoupler isolated Relay Module board Alarm PLC IO

    Ready stock, Ship from Malaysia

    RM11.90
    Stock available
    Add To Cartmore info
    1 Channel 12V Optocoupler isolated Relay Module board Alarm PLC IO

    Item ship from Malaysia, Ready stock

    1 Channel 12V Optocoupler isolated Relay Module board Alarm PLC IO

    RM11.00
    Stock available
    Add To Cartmore info
    8 Channel 12V Optocoupler isolated Relay Module board terminal H/L TTL

    Ready stock, Ship from Malaysia

    RM39.00
    Stock available
    Add To Cartmore info
    4 Channel 12V Optocoupler isolated Relay Module board terminal High/Low TTL

    Ready stock, Ship from Malaysia

    RM34.90   24.90   29%
    Out of stock
    more info
    8 Channel 5V Opto isolated Relay Module board terminal H/L TTL Arduino 8ch

    8 Channel 5V Opto isolated Relay Module board terminal H/L TTL Arduino 8ch

    RM31.80
    Stock available
    Add To Cartmore info
    1 Channel 5V High/Low level trigger 30A Relay board Opto PLC Arduino

    Ship from Malaysia, Ready stock.

    RM35.00   23.00   34%
    Stock available
    Add To Cartmore info
    4 Channel 5V Opto isolated Relay Module board terminal H/L Arduino Raspberry Pi

    Ready Stock, SHip from Malaysia

    RM25.90
    Stock available
    Add To Cartmore info
    Original IC ACS712 20A 5V Current Sensor Module Arduino DC Ammeter Hall effect ELC-20

    ACS712 Current Sensor Module - great for Arduino

    • Easy to use in circuit
    • Easy to use with Arduino
    RM11.50
    Out of stock
    more info