The RB951Ui-2HnD is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 802.11b/g/n wireless AP with antennas built in. 

It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. 

Package contains RouterBOARD 951Ui-2HnD in a plastic case and power adapter.

The hAP mini is a small 2GHz wireless access point for home or small offices. It has three ports, which are configured as one Internet port and two LAN ports, but can be reconfigured as desired, using the powerful RouterOS configuration options.

The powerful 650MHz CPU gives you full access to the wide variety of features provided by the versatile RouterOS operating system, but if all you want is a simple access point - it is already configured out of the box. You simply need to open it’s web configuration page and provide a password for it.

Gigabit PSE802G POE Injector/Switch 2-Port Fast 10/100/1000Mbps Ethernet Switch

• Ready stock, Ship from Malaysia

• Product specifications

  Details
  Product code	RB941-2nD-TC
  CPU nominal speed	650MHz
  CPU	QCA9533
  CPU core count	1
  Size of RAM	32MB
  10/100 Ethernet ports	4
  Wireless chip model	QCA9533
  Wireless standards	802.11b/g/n
  Number of USB ports	1
  Power Jack	1
  802.3af support	No
  Supported input voltage	5 V - 5 V
  PoE out	No
  PoE in	No
  Voltage Monitor	No
  Dimensions	113 x 138 x 29 mm
  Operating System	RouterOS
  Storage Type	FLASH
  RouterOS License Level	L4
  Antenna gain dBi	1.5 dbi
  Current Monitor	No
  Number of Chains	2
  CPU	Atheros AR9344
  Max Power consumption	Up to 3W

Manufacturer Profuct Page:

https://www.ubnt.com/unifi/unifi-ap-ac-lite/

Datasheet : Download Product Datasheet

4 Port Gigabit POE Injector 12V 24V 48V~57V DC IP CAM ubnt openmesh Mikrotik WIFI AP IP Phone

• Compatible with Ubiquiti, OpenMesh, Mikrotik and many more
  Access Points and IP Cameras and phones that use POE
  Most Cameras and phones need a 48 volt supply, Ubiquiti require 24 volts, others please check device manufacturer specification

• 24 port Shielded ethernet connectors with ground connector on back
• Dual Power input options - 5.5mm*2.1mm / Screw Terminal block 
  • You may use only 1 power input or dual power supply
  • DC jack 5.5*2.1mm support maximum 8A of total load.
  • Screw terminal block support Max 16A of total load
  • Same Voltage of power supply must be used if you use both power input
  • 2nd Power supply will work as load balance or failover
• power is on all the time on all ports
• Same voltage to all ports, current is shared as needed.
• Current Limiter of 650ma per port

• Always-on passive ( compatible with 802.3af POE devices) uses pins 4/5 for plus power, and 7/8 for ground.
• Many popular devices like IP Phones, Access Points and cameras use this method to centralize the power source - you can go for 328 ft with a 24v or 48v supply to a typical device.

• 1U Rack mount 

• 16 port Shielded ethernet connectors with ground connector on back
• Dual Power input options - 5.5mm*2.1mm / Screw Terminal block 
  • You may use only 1 power input or dual power supply
  • DC jack 5.5*2.1mm support maximum 8A of load.
  • Screw terminal block support Max 11A of load
  • Same Voltage of power supply must be used if you use both power input
  • 2nd Power supply will work as load balance or failover
• power is on all the time on all ports
• Same voltage to all ports, current is shared as needed.
• Current Limiter of 650ma per port

• Dimension: 483mm * 44mm * 25mm

• 12 port Shielded ethernet connectors with ground connector on back
• Power input options - 5.5mm*2.1mm 
• power is on all the time on all ports
• Same voltage to all ports, current is shared as needed.
• Current Limiter of 650ma per port

• IEEE 802.3af/AT 48V power on up to 4 ports
• Supply power to wireless access points and surveillance cameras over Cat-5/ Cat-6 cabling
• 6 10/100 Mbps Ports with AutoUplink
• 3 selectable Working mode
  • D: Normal Mode 100Mbps up to 100meter
  • V: Vlan Mode All POE port are isolated to protect from Multicast storm, virus, hack
  • E: Extend mode up to 250meter @ 10Mbps
• Supports PoE power up to 15W / 25W for each PoE port
• Total 96w POE output
• Supports PoE IEEE 802.3af/at compliant PDs
• Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
• 1K entry MAC address table of the PoE Switch with auto-learning and auto-aging
• LED indicators for monitoring power, link, activity 
• External & replace-able power adapter supply
• Bandwidth:1.6G

UBNT Ubiquiti Network POE-25-5W GP-G250-020 adapter injector 25V/24V 0.2A Bridge WIFI 

• Brand: UBNT Ubiquity Networks
  
• • Model no.: GP-B240-100
  • Input Voltage: AC 100-240V 50~60Hz 0.55A Max 0.75A
  • Output Voltage: DC24V +-5%
  • Power out Pin: Midspan 4, 5 (+) / 7, 8 (-)
  • Output current: 24W 1.0A
  • Operating Temperature: -10°C to +60°C
  • Size (LXWXH):  85 x 55 x 33 (mm)
  • AC Connector:  IEC-320 C6
  • Data IN / POE: RJ45 Shielded Socket
  • Surge Protection: Common Mode
  • Clamping Protection: 11V Data, 77.5V Power
  • Max Surge Discharge: 1200A (8/20uS) Power
  • Peak Pulse Curren:t 36A (10/1000uS Data)
  • Shunt Capacitance: <5pf data="" b="">
  • Response Time: <1nS
  • Compliance UL, EN55022 (CISPR22) class B, Meets CE
  • For Indoor Use Only
  • BLUE Color Power LED 2015 version
  • Remote Reset Capability Supports UBNT Airmax Bullet,Rocket,Nano,Pico & newer model

Ubiquiti UBNT Network 24V 1A POE-24-24W adapter injector GP-B24-100 AP Remote reset Rocket M2 M5 Bullet Grid Nano Mikrotik

• Output Voltage: AC 100-240V 50/60Hz 0.3A

• Output Voltage: DC15V +-5%

• Power out Pin: Midspan 4, 5 (+) / 7, 8 (-)

• Output current: 12W 0.8A

• Operating Temperature: -40°C to +55°C

• For Indoor Use Only
• Compatible with UBNT 15V version of POE adapter

PSE802 POE Injector/Switch 2-Port Fast 10/100bps Ethernet Switch

PSE802 POE Injector/Switch 2-Port Fast 10/100bps Ethernet Switch

•Ready Stock! Ship from Malaysia!

Integrated ESD protection 
•Compatible with Ubiquiti NanoStation, Bullet, PicoStation and others

• Remote Reset button for Ubiquiti dev

• Compatible with Ubiquiti, OpenMesh, Mikrotik and many more
  Access Points and IP Cameras and phones that use POE
  Most Cameras and phones need a 48 volt supply, Ubiquiti require 24 volts, others please check device manufacturer specification

• Wall mount, 8 port PoE injector

• Extend power to 328 ft or 100 meters