Home > Products > LAN / Network /POE /Switch /Router/Extender > Wireless LAN Router POE Switch > 5 port POE Network switch 48V 802.3af/at Max 30W /port AP HD Dahua HIK 96w
5 port POE Network switch 48V 802.3af/at Max 30W /port AP HD Dahua HIK 96w
enlarge

5 port POE Network switch 48V 802.3af/at Max 30W /port AP HD Dahua HIK 96w

RM  235.00  158.00  
Item details
SKU: 0843 POE5P48 L0
Weight: 1 kg, 0 grams
Stock: Out of stock


  Share This   Add To Facebook   Add To MySpace   

Product Introduction

What This Product Does

This is an 5-Port Switch with 4 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 96W, up to 30W per port, This POE switch can power more high-powered devices such as wireless Access Points (APs), IP Cameras with more IR or IP Phones. 
 

How This Product Works

4 POE ports switch support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.

 

Easy To Use

This POE Switch is easy to install and use. It requires no configuration or installation. With its simple design, outstanding performance and quality, the 5-Port Switch with 4-Port PoE is a great choice for expanding your home or office network.

 

Multi protection

  • Auto detection function: The POE output only will be enabled if POE device are detected.
  • Overload, over current & short circuit protection
  • 3 layer Lightning Surge protection system up to 3.8KV

Application

 
Choose to plug in up to five Ethernet or Fast Ethernet devices and mix in up to four IEEE802.3af/at IP-based devices like wireless access points or IP-based network surveillance cameras. Place these IEEE802.3af-compliant devices where they belong – high up on walls and ceiling for maximum coverage – or anywhere else you need them. Power and data are carried over standard Cat 5 / Cat 6 cabling.
 
The standards-based PoE Switch AT-POE1U4P/30W senses and adjusts for network speed and cabling type automatically, for easy integration into your existing 10/100 Ethernet network. For PoE, the switch automatically detects IEEE802.3af/at-compliant devices, and supplies power as needed. Front panel LEDs keep you informed of switch and PoE status.Engineered for compact convenience, it durable metal case that is easily positioned on your desktop or a wall.
 
The fan-less design quietly integrates with your small office environment.With data switching and Power over Ethernet integrated into one unit, it saves space, reduces cables and eliminates the requirement for dedicated electrical outlets – lowering installation costs, simplifying installation of PoE-capable devices, and eliminating the need for electricians or extension cords. All in all, a great benefit for a modest price.Providing 4-Port PoE in-line power interfaces,
 
it can easily build a power centrally-controlled IP phone system, IP Camera system and Wireless AP group for the enterprise. For instance, up to 4 PoE IP cameras can be installed around the corner in the company for surveillance demands or up to 4 PoE Wireless AP to build a wireless roaming environment in the office. Without the power-socket limitation, the Switch makes the installation of cameras or Wireless AP more easily and efficiently.
 
 

 

  • IEEE 802.3af/at power on up to 4 ports

  • Supply power to wireless access points and surveillance cameras over Cat-5/ Cat-6 cabling
  • 5 10/100 Mbps Ports with AutoUplink™
  • Supports PoE power up to 30W for each PoE port
  • Supports PoE power up to total 96W for all PoE ports
  • Supports PoE IEEE 802.3af compliant PDs
  • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
  • 1K entry MAC address table of the PoE Switch with auto-learning and auto-aging
  • LED indicators for monitoring power, link, activity 
  • External & replace-able power adapter supply

 

Specification

 
Item Specification
Product 5-PORT 10/100 SWITCH WITH 4-PORT POE
Type AT-POE1U4P/30W
Network Ports 5 10/100Mbps RJ45 Ports; AUTO Negotiation/AUTO MDI/MDIX
Transmission Method Store-And-Forward
Network Media 10BASE-T: UTP category 5 cable (maximum 100m); EIA/TIA-568 100Ω STP (maximum 100m); 100BASE-TX: UTP category 5, 5e cable (maximum 100m); EIA/TIA-568 100Ω STP (maximum 100m), UTP Cat 6 (Maximum 120m)
Performance Specifications Bandwidth: 1.6Gbps
Network latency: Less than 20 μs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
Buffer memory: 96 KB embedded memory per unit
Address database size: 2,000 media access control (MAC) addresses per system
Addressing: 1K MAC address table
Acoustic Noise: 0 dB
Network Protocol and Standards IEEE 802.3i 10BASET; IEEE 802.3u 100BASET; IEEE 802.3x Flow Control; IEEE 802.1af DTE Power via MDI; IEEE 802.3af
Status LEDs System: Power, Per Port: Link, Activity, Speed, PoE Active, PoE Fault
Power Supply Total Power Consumption: 90 W maximum; PoE Watt budget: 96W; IEEE802.3af Power Consumption: 60 W maximum (Ports 1 – 4); 48VDC, 2A power output; plug is localized to country of sale
Physical Specifications Dimensions (H x W x D): 25 x 120 x 90mm; Gross Weight: 900g
Environmental Specifications Operating temperature: 0 to 55° C
Storage temperature: -20 to 75°C
Operating humidity: 90% maximum relative humidity, non-condensing
Storage humidity: 95% maximum relative humidity, non-condensing
Operating altitude: 10,000 ft (3,000 m) maximum
Storage altitude: 10,000 ft (3,000 m) maximum
POE port Power output PIN 1,2+ | 3,6-
Safety CE Mark, FCC, ROHS

LED STATUS 

LED Label Color Status Defination
Power LED PWR Green ON Power Supply OK
Off No Power Supply
Status  LED LINK Yellow ON Network Link Established
Blink Data TX/RX
Off Network Disconnected
POE LED POE Green ON POE Enabled & normal
Blink POE abnormal (Overload / Short circuit)
Off POE disabled
Included
  • 5-PORT 10/100 SWITCH WITH 4-PORT POE
  • 48V 2A AC Adapter with power cord Free Upgrade from 48V 1.25A
Shipping & Warranty
  • Postage Method: 
  • Item usually will be post out same day / next working day (depends on Pos laju collection schedule) if payment verified before 12pm except there is special announcement.
  • Item usually will be arrive next working day after posted out for most of the major city area in West Malaysia, Sabah, Sarawak & Labuan
  • Parcel usually will be arrive within 1-3 working days EXCEPT: P.O.Box, rural area and unexpected delay by pos laju or missed delivery, addresee unreachable, etc.
  • 90 Days against manufacturer defect
About Us
  • Nobody is perfect, but we will try our best to serve your satisfaction and will improve from time to time. Your suggestion & understanding is highly appreciated.
  • Do not hesitate to contact us,  any enquiry, question, suggestion kindly email to us for faster reply at:
    • sales@ioline2u.com (Sales & After Sales Enquiry , Suggestion / Complaint )
    • support@ioline2u.com (Technical Support)